Tubing and casing running machinery

You are here

Hydraulic key FARR KT5500 (Canada)

For pipes with diameter 2-3/8' to 5-1/2' Equipped with computer system WinCatt '2K' that allows to register and analyze the data collected.

Industry is the soul of business and the keystone of prosperity
by Charles Dickens

Hydraulic tong FARR KT5500 completed with hydraulic counter-tong КТ5500

Hydraulic tong FARR KT5500 is light, compact and easy to use tool among other 2-3/8" to 5-1/2” tongs for pipes and couplings

Hydraulic tong FARR KT5500 is light, compact and easy to use tool among other 2-3/8" to 5-1/2” tongs for pipes and couplings

Range of tubing sizes: 60 mm - 139,7 mm.

Sizes of the jaws used are the following:

  • 2-3/8" (60,3 mm)
  • 2-7/8" (73,0 mm)
  • 3" (76.2 mm)
  • 3-1/8" (79.4 mm)
  • 3-3/8" (85.7 mm)
  • 3-1/2" (88.9 mm)
  • 4" (101.6 mm)
  • 4-1/8" (104.8 mm)
  • 4-1/2" (114.3 mm)
  • 4-3/4" (120.7 mm)
  • 5" (127.0 mm)
  • 5-1/2" (139.7 mm)
  • 95 mm.

Max torsion torque (Rineer hydraulic motor): 25357 Nm; (25357 Nm; 2580 Kg/m)

Length: 52" (132,1 cm)

Width: 26-3/8" (67 cm)

Height: 62-5/8" (159 cm)

Space to grip a pipe: 6 3/4" (17,14 cm)

Weight (approximately): 1900 pounds (864 kg)

WinCatt '2К' it is a system for acquisition, recording and processing of data as well as for real time operating which allows setting coupling joint parameters and thereupon monitoring and control of the process quality. The data is reordered on electronic media.

Hydraulic unit  with WESTCO (WPI) diesel-engine drive is installed on (open) frame skid for casing and tubing tong operation. 

Performance Characteristics:

  • Deutz F4L914 four-cylinder and four-cycle non-turbo air cooled diesel-engine
  • power 74 hp, 2100 r/min
  • dimensions (LxWxH): 100" (254 cm) х 48" (122 cm) х 62" (158 cm)
  • approximate weight: 1586 kg without liquid